| Search Results |
 |
Positioning your projector Choosing a location LX-HM502Z
|
projection screen and qualified projector ceiling mount kit are required for this installation location.
|
|
|
Precautions for Safe Use
|
The projector may fall, causing serious injury to a child or adult, and serious damage to the projector. Use only with a cart or stand recommended by the manufacturer, or sold with the projector. Wall or shelf mounting should be carried out in accordance with the manufacturer’s directions, and should use a mounting kit approved by the manufacturers.
|
|
|
Safety Precautions
|
The projector may fall, causing serious injury to a child or adult, and serious damage to the projector. Use only with a cart or stand recommended by the manufacturer, or sold with the projector. For wall or shelf mounting , use a tool such as a mounting kit to secure the projector.
|
|
|
Determining the Installation Position
|
A slight error in the projection angle can be corrected using the [KEYSTONE] button ... Ceiling Mounting or Rear Projection You can mount the projector on the ceiling (Ceiling mounted ) with it turned up side down or place it behind the screen (Rear) if you use a translucent screen. If you mount the projector on the ceiling, you have to invert the projected image
|
|
|
How to install the software for the DZ-3600U
|
Make sure that the DZ-3600U's power is off before you install the software. Attempting to install it with the power on will result in an [Unknown device] error message after installation. If you have already started to install the software with the power on, stop the installation, shut down Windows and turn off your computer.
|
|
|
How to Set an IP Address when using the SX80 Mk II
|
Setting and IP Address (SX80 Mk II) Setting an IP Address It is possible to send an error notification e-mail ( P 119) from the projector to the computer when you connect the projector to the network.
|
|
|
High Installation, Ceiling Mounting, and Rear Projection WUX7500 / WUX6700 / WUX5800
|
In [Image flip H/V] ( P 143) in the menu, choose a method of projection that corresponds to how the projector is installed. 1 Press the MENU button on the remote control or projector, and then select [Install settings] > [Image flip H/V]. 2 Select the orientation of how the projector is installed.
|
|
|
Ceiling Mounting or Rear Projection
|
|
Mounting the Projector on the Ceiling
|
|
Error Notification Mails WUX7500 / WUX6700 / WUX5800
|
