Ask a Question
FiltersClear
CMS-CATEGORY_REF
CANON (4)
Content Source
Articles (4)
Products
REALiS WUX5800 Pro AV (4)
 
 
Search Results
CMS-XML Menu Image Adjustment WUX7500 / WUX6700 / WUX5800
Brightness Adjust image brightness. Contrast Sharpen or soften image contrast. Sharpness Adjust image sharpness. Gamma Correct image areas that are too dark or too bright to see clearly. Color adjustment Adjust color -related settings such as color level, color balance, and color temperature. In [DICOM SIM] image mode, [ Color temperature] is not adjusted with numeric values but set to one of the following five presets. Preset 1: Prioritize brightness, relative to DICOM Standard Part 14. Preset 2: Prioritize color tone, relative to DICOM Standard Part 14. Preset 3: Adjust color to conform to DICOM Standard Part 14. Preset 4: Reproduce colors of X-ray film (Clear base). Preset 5: Reproduce colors of X-ray film (Blue base). Advanced adjustment Fine-tune noise reduction and color tone. Ambient light Minimize the effect of ambient light on the screen. [Ambient light] is available when the image mode is [Photo/sRGB] Random noise reduction Reduce random image noise*. * Effective on noise with an irregular frequency or amplitude.
CMS-XML Menu Install Settings WUX7500 / WUX6700 / WUX5800
Edge blending Brightness and colors of overlapping edges of images from multiple projectors, which form a blending area, can be adjusted for a more seamless appearance. For detailed instructions, see “Projecting from Multiple Projectors at Once (Edge Blending)”
CMS-XML Multiple Projectors Making Overlapping Edges Less Noticeable WUX7500 / WUX6700 / WUX5800
• Results of adjusting the black level of area B are applied to all sides. • If you perform adjustments using [ Color blending adjustment] or other menus, that may not eliminate the distracting colors and differences in brightness in areas where the images overlap. • Blending can be fine-tuned by adjusting [Adjustment type] > [Black level] > [Red], [Green], and [Blue].
CMS-XML Projecting from Multiple Projectors at Once (Edge Blending) WUX7500 / WUX6700 / WUX5800
Keep in mind when projecting from multiple projectors that each unit may have a different color balance. Thus, even with the same model, differences in color may be noticeable. 1 Select [Install settings] > [Professional settings] > [Edge blending] > [Adjust]. 2 Set [Marker] to [On]. Marker lines are projected on the images . The red marker indicates the start position for adjustment, and the green marker, the end position. Initially, only the red marker is visible when you prepare for edge blending, because it is projected over the green marker 3 In [Side], select [Start position] and use the buttons to move the start marker to the outer edge of the overlapping area. Do this for each edge; on the top, bottom, left, and right. 4 Select [Width] and use the buttons to move the end marker to the inner edge of the overlapping area. Do this for each edge; on the top, bottom, left, and right. The area between the starting and ending markers is called the blending area. Shading is applied to this area, and the brightness is adjusted to match portions that overlap with other areas. After you complete settings for one image , do the same thing for the other one to specify the blending area. Adjust the settings to make the blending area for each image the same. 5 Set [Marker] to [Off].