Search Results |
|
Specifications (P-215)
... 8 to 216 mm ( 2 to 8 .5" ... 70 to 356 mm (2. ... 1,000 mm (39. ... ... 0.15 mm (0. ... 9 to 108 mm (3. ... 152.4 mm (5 to ... ... 0.3 mm (0. ... 49 to 55 mm (1. ... 85 to 91 mm (3. ... ... 0.3 mm (0. ... ) Width 86 mm (3. ... ) Length 54 mm (2. ... 0.76 mm (0. ...
|
|
|
Error Codes for the DR-G2090, G2110, and G2140 scanners
Error [P***] Paper jammed in scanner Error [C***] Scanner cover is open Error [J***] Paper feed error detected Error [J***] A document was skewed Error [D***] A double paper-feed has occured Error [J*** ] Staple was detected Error [J***] Dust was detected Error [U***] The count does not match Error [ E ***] Scanner hardware problem
|
|
|
What documents can I scan with my DR-M1060 / DR-M1060 II Scanner?
Width: 50.8 mm to 300 mm (2" to 11.8") Length: 70 mm to 432 mm ( 2.8 " to 17") Up to 3,000 mm (118.1") in Long Document mode
|
|
|
Documents (DR-G1130/G1100)
Size Length : 70 mm to 432 mm ( 2.8 " to 17") (without using the Long Document Mode) 70 mm to 3,000 mm (2.8" to 118.1") (Using [ON2] in the Long Document Mode)
|
|
|
Documents (P-215)
Document Type Width Length Thickness (density) Thickness Plain paper 50.8 to 216 mm ( 2 to 8 .5") 70 to 356 mm (2.756 to 14")¹ 52 to 128 g/m² (14 to 34 lb bond)
|
|
|
Common Problems and Solutions - Memory becomes insufficient and scanning stops.. (DR-F120)
Common Problems and Solutions If an error message appears due to insufficient memory while scanning is in progress, exit the application, change the scanning conditions ( e .g. reduce the resolution or page size) and then try scanning again. In addition, the amount of memory used can be contained by turning off [Moire Reduction] and [Prevent Bleed Through / Remove Background] if they are set to on.
|
|
|
Displayed Error Codes
When a scanning error occurs, the following error codes are displayed in the Job. No. Indicator.
|
|
|
DR Scanner driver not found / TWAIN Error
While attempting to scan you receive the error message "Driver not found" or a TWAIN error . Do you know if a Windows update was applied recently? If so, it is possible that the .INI
|
|
|
Check Error Message on Control Panel (DR-G1130/G1100)
When document feeding is interrupted, an error message will appear on the display panel.
|
|
|
Clearing Paper Jams, Skewed Documents, Stapled Documents, and Feed Errors - DR-M1060 / DR-M1060 II
When paper jams and skewed documents are detected during scanning, the following error codes are displayed in the scanner's display panel and scanning is interrupted. Paper jam error code Skew, staple, or feed error detection error code.
|
|