| Search Results |
 |
Setup the MX860 for use over a wireless LAN
|
Wireless Setup page to assist you in setting up your printer on your network. Click the appropriate link( s ) below for help . If you have already set up your printer on the network with one computer and want to set up additional computers to work with your printer
|
|
|
How to set the communication channel on the 430EX II Speedlite.
|
When the receiver unit ( s ) is ready to fire (fully charged), the AF- assist beam will blink at 1-sec intervals
|
|
|
The Flash does not Fire during Wireless Flash Shooting
|
When the receiver unit( s ) is ready to fire (fully charged), the AF- assist beam will blink at 1-sec. intervals.
|
|
|
Replace ink tank(s) MP640
|
With the Ink Lamps If your product issue was not resolved after following the steps above, or if you require additional help , please create or log in to your Canon Account to see your technical support options.
|
|
|
LCD Error Messages - MX410
|
Fax related messages ... Replacing Cartridge( s ) ... Replacing Cartridge( s ) ... correct cartridge( s ) properly ... correct cartridge( s ) properly ... Replacing Cartridge( s ) ... contained in the fax may be lost ... , the received fax will not be ... ... manually print out faxes that were stored ... ... that the received fax is forcibly printed ... part of the fax information may not ... ... Replacing Cartridge( s ) ... contained in the fax may be lost ... , the received fax will not be ... ... manually print out faxes that were stored ...
|
|
|
How to print using the mobile terminal such as a smartphone in a wireless LAN
|
For the wireless setup for the Android terminal, follow the instructions below. NOTE: The procedures below are the ones for GALAXY S SC-02 B (Android 2.2). Step 1.
|
|
|
420EX Speedlite: Here is a basic wireless flash setup.
|
Sample Wireless Flash System You can easily set up an E-TTL autoflash system with the 550EX, ST-E2 or MR-14EX as the sender unit and the 420EX as the receiver unit. Just set the 420 EX's wireless selector to <receiver> and position the receiver unit( s ) as desired within the wireless transmission range
|
|
|
550EX Speedlite : How to turn the Master Flash OFF and use just receiver unit(s).
|
The flash ratio can also be changed by changing the distance of the receiver units to the subject. With the EOS 1D, 1 V , 3, D60, D30, Elan 7/7E and 30/33, you can use the modeling flash to check the lighting effect
|
|
|
580EX Speedlite : How to prevent the sender unit from firing its flash.
|
You can disable the sender unit from firing so that only the receiver unit( s ) will fire a flash. Press the button so that the display blinks as shown on the left Disable the sender unit's flash firing
|
|
|
430EX Speedlite : Other useful features available when using Full Automatic Wireless Flash.
|
Flash exposure compensation and other setting set with the sender unit will also be automatically set in the receiver units. Thus, you need not operate the receiver unit( s ). Wireless flash with the following setting can be done in the same way as with normal flash shooting
|
|
