| Search Results |
 |
What kind of software is Canon XF Plugin for Final Cut Pro? (Version 1.4)
|
It may not be possible to transfer or play back clips recorded with video configurations using the 50 Mbps (4:2:2) bit rate with the following combinations of resolution and frame rate: 1280x720, 29.97P; 1280x720, 25.00P; 1280x720, 23.98P. Upgrade to Final Cut Pro 7.0.3 or perform the following procedure.
|
|
|
What is included in firmware version 1.1.1 for the EOS 5D.
|
What has been changed in Version 1.1.1 firmware? Specifically, the four lenses listed in item 2 above have been added.In images taken with these lenses and cameras updated to v1.1.1, the lens aberration correction function can be used.
|
|
|
What cable can I use to connect the camera to a TV? (PowerShot G7 X / PowerShot SX710 HS)
|
Solution Connect the camera to a TV a commercially available HDMI cable (not exceeding 2.5 m, with a Type D terminal on the camera end) or the AV Cable AVC-DC400ST (sold separately). NOTE
|
|
|
What cable can I use to connect the camera to a TV? (PowerShot G1 X Mark II / N100)
|
Solution You can connect the camera to a TV with a commercially available HDMI cable (not exceeding 2.5 m, with a Type D terminal on the camera end), or with the AV Cable AVC-DC400ST (sold separately). NOTE
|
|
|
Compatible Remote Switch (EOS 6D)
|
Solution Remote Switch and Remote Controller You can connect the Remote Switch RS-80N3, Timer RemoteController TC-80N3 ( sold separately), or any EOS accessoryequipped with an N3-type terminal to the camera for shooting. NOTE
|
|
|
Compatible Remote Switch (EOS 5D Mark III)
|
Solution Remote Switch and Remote Controller You can connect the Remote Switch RS-80N3 or Timer Remote Controller TC-80N3 ( sold separately) or any EOS accessory equipped with an N3-type terminal to the camera and shoot with it. NOTE
|
|
|
Compatible Remote Switch (Movies/Photos) (EOS REBEL T5/EOS 1200D)
|
Remote switch with a 60 cm/2.0 feet cord for pressing the shutter button halfway or completely. It connects to the camera's remote control terminal .
|
|
|
Compatible Remote Switch (EOS REBEL T4i/EOS 650D)
|
Remote Switch RS-60E3 (sold separately) comes with an approx. 60 cm/2.0 ft cord. When connected to the cameras remote control terminal , Remote Switch RS-60E3 can be used to press the shutter button halfway and completely.
|
|
|
What batteries can I use with my camera?
|
The message [Battery communication error .] is displayed if you use a non-genuine Canon battery pack, and user response is required.
|
|
|
What updates are included in EOS 5D Mark III firmware update v.1.2.1?
|
... autofocus when the camera is used with Canon EF lens/ ... ... speed of the camera's acquisition of focus when using a Canon Speedlite's AF- ... ... in which the camera may not function ... ... firmware cannot be updated properly. ... 12. Corrects errors in the Arabic ... ... in which the camera changes the AF ... ... 1 is for cameras with firmware version ... If the camera's firmware is already ... ... D Mark III camera is updated to version 1 ... ... recommended that the latest application software* ... Mark III is updated to the new ...
|
|
