Cannot Send a Fax ID: 8201922200_ EN_ 1 |
Issue | Cannot send a fax.
|
Cause | If you cannot send faxes, check the following.
|
Summary |
|
See Also | |
Cause | Is the proper line type selected?
|
Summary | Make sure that the proper line type is selected.
|
See Also | |
Cause | Is the machine in fax mode?
|
Summary | Press [ ] to switch to fax mode.
|
See Also | |
Cause | Is the document properly set?
|
Summary | Properly place the document.
|
See Also | |
Cause | Is the one-touch key or coded dial code registered properly?
|
Summary | Make sure that the number is properly registered.
|
See Also | |
Cause | Did you dial the correct number?
|
Summary | Make sure that the number is correct.
|
See Also | |
Cause | Are there other documents being sent from memory?
|
Summary | Wait until the transmission is completed.
|
See Also | |
Cause | Is the Processing/Data indicator blinking?
|
Summary | The external phone is busy. Please wait until the external phone is not busy.
|
See Also | |
Cause | Has an error occurred during a transmission?
|
Summary | Print the transmission management report to check for errors.
|
See Also | |
Cause | Have you checked to see if the receiving fax machine is having problems?
|
Summary | - Make sure that the receiving fax machine is compatible with your machine (For example, check to see if the receiving fax machine is a Super G3 fax machine).
- Make sure that there's enough paper loaded in the receiving fax machine's paper tray.
- Make sure that the receiving fax machine is not busy. (If the line is busy, <Busy/No Signal> is shown in the error transmission report.)
|
See Also | |
Cause | Are you sending a fax to an international destination?
|
Summary | Add a pause to the number and send the fax again. When making an overseas call, you may need to add a pause to the fax number. Since signals are transmitted over long distances across a complicated channel, your call may not be connected without adding a pause after the country code or in front of the fax number. By adding a pause, enough time elapses before the machine starts dialing the number again. 1.Place your fax. (See "Placing Documents".) (See "Paper Type" in the "Paper Handling".)
2.Press [ ].
3.Specify the scanning settings as needed. (See "Scanning Settings When Sending a Fax".)
4.Enter the international access code using the numeric keys. For more information on international access codes, contact your telephone company.
|
See Also | |
Cause |
|
Summary | 5.Press [ ] (Pause) to enter a pause as needed. - The letter <p> is displayed to indicate that a pause is added. - The default pause length is two seconds*. To change it, see "Pause Time." in the "e-manual" - To add more pauses into the dialing sequence, press [ ] (Pause) again. * The default pause length varies depending on the country where you are using the machine. 6.Enter the country code, the area code, and the fax/telephone number using the numeric keys.
|
See Also | |
Cause |
|
Summary | 7.Press [ ] (Pause) to add a pause to the end of the fax/telephone number as needed. - The letter <P> is displayed at the end of the fax number.
- A pause added to the end of the number is set to 10 seconds.
8.Press [ ] (Start).
|
See Also | |
Cause |
|
Summary | Change the initial sending speed "TX Start Speed". Change the transmission start speed if you are experiencing a transmission problem. [ ] (Menu) -> <System Settings> -> <Communication Management Settings> -> <Fax Settings> -> <TX Start Speed> 33600 bps (Default setting), 14400 bps, 9600 bps, 7200 bps, 4800 bps, 2400 bps
|
See Also | |