Follow these instructions when using the camera as an access point. To connect using another access point, please refer to the cameraâ s " Help Guide".
Please click on the following link to view a video explaining how to setup you printer for wireless printing. https://www.youtube.com/watch? v = s 82P0x0w-2c Part 2: Downloading and Installing the Computer Software
For the wireless setup for the Android terminal, follow the instructions below. NOTE: The procedures below are the ones for GALAXY S SC-02 B (Android 2.2). Step 1.
The MR-14EX and MT-24EX are fully compatible with the Canon Speedlite wireless flash system. Because the MR-14 EX /MT-24 EX already comprise units A and B of a wireless flash group, you would normally set any additional unit( s ) as a receiver assigned to group C. Be sure to set A: B C ratio. The Macro Lite’s A and B tubes will light the main subject.
1. To set the sender unit: Press the Wireless Flash Button until the RT icon (upper-right corner of the unit’s LCD screen) and <MASTER> appear. The wireless flash cycle via button is: Conventional on-camera flash > Radio-based Master unit > Radio-based Slave unit > Optical-based Master unit > Optical based Slave unit. 2. To set the receiver unit( s ): Press the Wireless Flash Button until the RT icon and <SLAVE> appear.
2. Enable optical transmission on 600 EX -RT receiver unit( s ). Press the Wireless Flash Button until the <OPTICAL TRANSMISSION> icon and <SLAVE> appear. You can combine one or more 600EX-RTs as optical-based receiver units with any combination of
Sample Wireless Flash System You can easily set up an E-TTL autoflash system with the 550EX, ST-E2 or MR-14EX as the sender unit and the 420EX as the receiver unit. Just set the 420 EX's wireless selector to <receiver> and position the receiver unit( s ) as desired within the wireless transmission range